more modes

LEDLamp.ino

@@ -242,6 +242,8 @@ void handleSTAMode() {
 		connectStart = millis();
 		setState(STATE_CONNECTING);
 	}
+
+	driveLEDStrip();
 }
 
 void handleError() {
@@ -270,6 +272,22 @@ void startSTAWebServer() {
 	Serial.println(":81/");
 }
 
+void driveLEDStrip() {
+	Config cfg = configManager.getConfig();
+
+	switch (cfg.mode) {
+		case LM_RAINBOW:
+			ledMngr.setBrightness(cfg.brightness);
+			ledMngr.rainbow();
+			break;
+		case LM_FLASH:
+			ledMngr.flash();
+			break;
+		default:
+			break;
+	}
+}
+
 // ---------- SETUP ----------
 void setup() {
 	Serial.begin(115200);

LEDModes.h

@@ -11,12 +11,12 @@
 #include <string.h>
 
 enum LEDModes {
-	LM_SINGLE_COLOR = 0,
-	LM_RAINBOW = 1,
+	LM_SINGLE_COLOR = 0,	// done
+	LM_RAINBOW = 1,			// done
 	LM_SPECTRAL = 2,
 	LM_FADING = 3,
-	LM_FLASH = 4,
-	LM_SEGMENTS = 5
+	LM_FLASH = 4,			// done
+	LM_SEGMENTS = 5			// done
 };
 
 static LEDModes parseMode(const char *mode) {

LEDStripManager.cpp

@@ -27,6 +27,7 @@ void LEDStripManager::begin() {
 	pinMode(LED_STRIP_DATA_PIN, OUTPUT);
 
 	digitalWrite(LED_STRIP_POWER_PIN, HIGH); 	// LED zunächst EIN
+	digitalWrite(LED_STRIP_DATA_PIN, HIGH);
 
 	Config cfg = configManager.getConfig();
 
@@ -41,20 +42,26 @@ void LEDStripManager::begin() {
 	strip.clear();
 	strip.show();            	// Setzt alle LEDs auf "aus"
 
-	if (cfg.mode == LM_SINGLE_COLOR) {
-		strip.setBrightness(cfg.brightness); 	// Helligkeit (0 bis 255)
-		setAll(cfg.color.r, cfg.color.g, cfg.color.b, cfg.color.w);
-	} else {
-		// Setzt die erste LED (Index 0) auf rotes Licht (Rot, Grün, Blau, Weiss)
-		strip.setPixelColor(0, strip.Color(255, 0, 0, 0));
-		// Setzt die zweite LED auf grün
-		strip.setPixelColor(1, strip.Color(0, 255, 0, 0));
-		strip.setPixelColor(2, strip.Color(0, 0, 255, 0));
-		strip.setPixelColor(3, strip.Color(0, 0, 0, 255));
-		// Schickt die Farbinformationen zum LED-Streifen
-		show();
+	switch (cfg.mode) {
+		case LM_SINGLE_COLOR:
+			this->setBrightness(cfg.brightness);
+			setAll(cfg.color.r, cfg.color.g, cfg.color.b, cfg.color.w);
+			return;
+		case LM_SEGMENTS:
+			this->setBrightness(cfg.brightness);
+			setSegments();
+			return;
+		default:
+			// Setzt die erste LED (Index 0) auf rotes Licht (Rot, Grün, Blau, Weiss)
+			strip.setPixelColor(0, strip.Color(255, 0, 0, 0));
+			// Setzt die zweite LED auf grün
+			strip.setPixelColor(1, strip.Color(0, 255, 0, 0));
+			strip.setPixelColor(2, strip.Color(0, 0, 255, 0));
+			strip.setPixelColor(3, strip.Color(0, 0, 0, 255));
+			// Schickt die Farbinformationen zum LED-Streifen
+			show();
+			return;
 	}
-
 }
 
 void LEDStripManager::clear() {
@@ -67,12 +74,6 @@ void LEDStripManager::show() {
 
 void LEDStripManager::on() {
 	Serial.println("LEDStripManager LED ON");
-
-	digitalWrite(LED_STRIP_POWER_PIN, HIGH);
-	delay(50);
-	digitalWrite(LED_STRIP_DATA_PIN, HIGH);
-	delay(50);
-
 	begin();
 }
 
@@ -110,7 +111,19 @@ void LEDStripManager::onModeChange(LEDModes mode) {
 	cfg.mode = mode;
 	configManager.saveConfig(cfg);
 
-	//TODO: react on mode change on strip
+	// Handle only single action modes here. For Animations use loop functions with nonblocking timers
+	switch (mode) {
+		case LM_SINGLE_COLOR:
+			this->setBrightness(cfg.brightness);
+			setAll(cfg.color.r, cfg.color.g, cfg.color.b, cfg.color.w);
+			return;
+		case LM_SEGMENTS:
+			this->setBrightness(cfg.brightness);
+			setSegments();
+			return;
+		default:
+			return;
+	}
 }
 
 void LEDStripManager::onColorChange(uint8_t red, uint8_t green, uint8_t blue, uint8_t white) {
@@ -132,8 +145,22 @@ void LEDStripManager::onBrightnessChange(uint8_t brightness) {
 	this->setBrightness(brightness);
 }
 
-uint32_t
-LEDStripManager::wheel(uint8_t pos) {
+void LEDStripManager::setSegments() {
+	int nbrPixel = strip.numPixels();
+	int third = nbrPixel / 3;
+
+	for (int i = 0; i < nbrPixel; i++) {
+		if (i < third)
+			setPixel(i, 255, 0, 0, 0);
+		else if (i < 2 * third)
+			setPixel(i, 0, 255, 0, 0);
+		else
+			setPixel(i, 0, 0, 255, 0);
+	}
+	show();
+}
+
+uint32_t LEDStripManager::wheel(uint8_t pos) {
 	pos = 255 - pos;
 
 	if (pos < 85) {
@@ -150,14 +177,58 @@ LEDStripManager::wheel(uint8_t pos) {
 	return strip.Color(pos * 3, 255 - pos * 3, 0);
 }
 
-void LEDStripManager::rainbow(uint8_t wait) {
-	for (long firstPixelHue = 0; firstPixelHue < 5 * 65536; firstPixelHue += 256) {
+void LEDStripManager::rainbow() {
+
+	static uint8_t delay = 20;
+	static uint32_t lastUpdate = 0;
+
+	if (digitalRead(LED_STRIP_POWER_PIN) == HIGH) {
+
+		if (millis() - lastUpdate < delay)
+			return;
+
+		lastUpdate = millis();
+
 		for (uint16_t i = 0; i < strip.numPixels(); i++) {
 			uint32_t pixelHue = firstPixelHue + (i * 65536L / strip.numPixels());
 			strip.setPixelColor(i, strip.gamma32(strip.ColorHSV(pixelHue)));
 		}
 
 		strip.show();
-		delay(wait);
+
+		firstPixelHue = (firstPixelHue + 256) % 65536;
 	}
 }
+
+void LEDStripManager::flash() {
+
+	static const uint32_t onMillis = 1000;
+	static const uint32_t offMillis = 500;
+
+	static bool ledOn = false;
+	static uint32_t lastChange = 0;
+
+	if (digitalRead(LED_STRIP_POWER_PIN) == HIGH) {
+
+		Config cfg = configManager.getConfig();
+		uint32_t now = millis();
+
+		if (ledOn) {
+			if (now - lastChange >= onMillis) {
+				// LEDs ausschalten
+				clear();
+				show();
+				ledOn = false;
+				lastChange = now;
+			}
+		} else {
+			if (now - lastChange >= offMillis) {
+				// LEDs einschalten
+				setAll(cfg.color.r, cfg.color.g, cfg.color.b, cfg.color.w);
+				ledOn = true;
+				lastChange = now;
+			}
+		}
+	}
+}
+

LEDStripManager.h

@@ -32,7 +32,11 @@ class LEDStripManager {
 
 		void setAll(uint8_t red, uint8_t green, uint8_t blue, uint8_t white);
 
-		void rainbow(uint8_t wait);
+		void rainbow();
+
+		void setSegments();
+
+		void flash();
 
 		void onModeChange(LEDModes mode);
 
@@ -46,6 +50,8 @@ class LEDStripManager {
 		ConfigManager &configManager;
 
 		uint32_t wheel(uint8_t pos);
+
+		uint32_t firstPixelHue = 0;
 };
 
 #endif

States.h

@@ -14,7 +14,6 @@ enum AppState {
 	STATE_CONNECTING,
 	STATE_STA_MODE,
 	STATE_ERROR
-
 };
 
 const char* stateToString(AppState state) {

sloeber.ino.cpp

@@ -2,7 +2,7 @@
 //This is a automatic generated file
 //Please do not modify this file
 //If you touch this file your change will be overwritten during the next build
-//This file has been generated on 2026-06-27 09:18:25
+//This file has been generated on 2026-06-28 18:20:27
 
 #include "Arduino.h"
 #include "Arduino.h"
@@ -32,6 +32,7 @@ void handleAPMode() ;
 void handleSTAMode() ;
 void handleError() ;
 void startSTAWebServer() ;
+void driveLEDStrip() ;
 void setup() ;
 void loop() ;